Adequacy of personal fall arrest energy absorbers in relation to heavy workers

Despite the increasing weight of workers, most energy absorbers of personal fall arrest systems are only tested to 100 kg. In addressing this shortcoming this research aims to evaluate the capacity of fall arrest energy absorbers in relation to the weight of heavy workers so as to provide recommendations for improvements to current fall arrest standards. A series of dynamic drop tests based on the Australian and New Zealand fall protection equipment standard (AS/NZS 1891.1:2007) were conducted. A total of 31 samples on seven types of energy absorbers were undertaken. The experiment simulated a worst credible scenario of a 3.8 m fall of a rigid mass which was connected using inelastic material. The capacity of each type of energy absorber was determined using the test mass that caused one or both of the following test criteria to be breached: (1) at least two samples reached the maximum possible extension and (2) at least two samples had the maximum arrest force exceeding 7 kN. The estimated capacities were then compared with the 95th percentile weight of worker working at height. The research demonstrates that most energy absorbers are not able to ensure that the two test criteria are not breached during the arrest of a heavy worker in the worst case scenario fall. It is recommended that the test mass stipulated in fall arrest standards should be revised and increased to accommodate the increasing weight of workers.     

Pesticide occurrence and aquatic benchmark exceedances in urban surface waters and sediments in three urban areas of California, USA, 2008–2011

Urban pesticide use has a direct impact on surface water quality. To determine the extent of pesticide contamination, the California Department of Pesticide Regulation initiated a multi-area urban monitoring program in 2008. Water and sediment samples were collected at sites unaffected by agricultural inputs in three areas: Sacramento (SAC), San Francisco Bay (SFB), and Orange County (OC). Samples were analyzed for up to 64 pesticides or degradates. Multiple detections were common; 50 % of the water samples contained five or more pesticides. Statewide, the most frequently detected insecticides in water were bifenthrin, imidacloprid, fipronil, fipronil sulfone, fipronil desulfinyl, carbaryl, and malathion. Bifenthrin was the most common contaminant in sediment samples. Key differences by area: OC had more pesticides detected than SAC or SFB with higher concentrations of fipronil, whereas SAC had higher concentrations of bifenthrin. The most frequently detected herbicides were 2,4-D, triclopyr, dicamba, diuron, and pendimethalin. Key differences by area: OC and SFB had higher concentrations of triclopyr, whereas SAC had higher concentrations of 2,4-D and dicamba. Detection frequency, number of pesticides per sample, and pesticide concentration increased during rainstorm events. In water samples, all of the bifenthrin, malathion, fipronil, permethrin, and λ-cyhalothrin detections, and most of the fipronil sulfone and cyfluthrin detections were above their lowest US EPA aquatic benchmark. Diuron was the only herbicide that was detected above its lowest benchmark. Based on the number of pesticides and exceedances of aquatic benchmarks or the high number of sediment toxicity units, pesticides are abundant in California surface waters.     

Analysis of building environment assessment frameworks and their implications for sustainability indicators

Green construction is gaining increasing attention in the global context. However, the construction of sustainable green buildings and environments involves different tools and systems and diverse perspectives. Therefore, the development of environmental assessment tools is an important task for managing green housing and green building projects. In this paper, we discuss the benefits, limitations, and future directions of the assessment framework. There are four characteristics of building environmental assessment, i.e., comprehensiveness, design guideline, signaling, and communication tools, which afford both benefits and limitations. We illustrate the role of the assessment framework as a hub promoting integration of diverse knowledge, as a design guideline encouraging better design and action, as signaling environmentally friendly design and action, and as a communication tool. On the other hand, there are limitations, such as the use of a mixture of quantitative and qualitative measures, ambiguity of weighing, lack of financial evaluation, and lack of involvement of diverse disciplines and stakeholders. To develop an effective assessment framework, the following three factors must be considered: knowledge, power, and implementation. We propose that knowledge innovation, a credible approach for a salient solution, and collective action represent the future challenges of the assessment framework.     

Effects of metsulfuron‐methyl on microbial biomass and populations in soils

Abstract

Effects of the herbicide metsulfuron‐methyl on soil microorganisms and their activities in two soils were evaluated under laboratory conditions. Measurements included their populations, soil respiration, and microbial biomass. In the clay soil, bacterial populations decreased with increasing concentration of metsulfuron‐methyl during the first 9 days of incubation but exceeded that of the control soil from day 27 onward. In the sandy loam soil, the herbicide reduced bacterial populations during the first 3 days after application, but these increased to the level of untreated controls after 9 days’ incubation. Fungal populations in both soils increased with increasing metsulfuron‐methyl concentrations, especially in the sandy loam soil. CO₂ evolution was stimulated in both soils in the presence of the herbicide initially, but decreased during days 3 to 9 of the incubation period before increasing again afterward. The presence of metsulfuron‐methyl in the soil increased microbial biomass, except in sandy loam soil at the first day of incubation.     

Applying systems thinking concepts in the analysis of major incidents and safety culture

In recent years, investigations into major incidents often highlight poor safety culture as one of the key causal factors. These investigations are often assisted by causal analysis tools that help to ensure that the investigation and the information captured are systematic. However, current causal analysis tools are not designed to analyse dynamic complexity of major incidents and safety culture, which arises from the interactions between actors and the temporal and spatial gaps between actions and consequences. This is because most causal analysis tools model events and causal factors linearly. In contrast, systems thinking, a discipline of seeing systems holistically, emphasises the circular nature of complex systems, i.e. cause and effect are not distinguishable. This paper proposes that traditional causal analysis tools and investigation should be enhanced with the use of systems thinking tools.One of the systems thinking tools that is particularly useful in analysing major incidents and safety culture is causal loop diagrams. The diagrams can be used to explain the systemic structure sustaining a safety culture and identify effective interventions to improve the safety culture and prevent a recurrence of a major incident. The paper demonstrates the use of systems thinking and causal loop diagrams through a case study on Bellevue hazardous waste fire in Western Australia. The case study shows how different actors in the system, each acting in reaction to pressures that they are facing, produced and sustained a poor safety culture that was a major contributory factor to the fire in 2001.     

Analysis of pesticide residues in Peninsular Malaysian waterways

The use of organochlorine pesticides has caused concern due to their effects on human health and the Malaysian aquatic ecosystem, particularly so in view of their persistent and bioaccumulative properties. Since the extent of organochlorine pesticide pollution in Malaysian waterways is unknown except for isolated instances, a systematic survey has now been carried out. Water samples from various rivers were extracted, cleaned up with Florisil and analysed for the individual organochlorine pesticides by gas chromatography (GC) with an electron capture detector (ECD). DDE, DDT and heptachlor were present in all the river water samples of the west coast of Peninsular Malaysia. Other organochlorine pesticides were also identified from the water samples. However, the levels of all these are still below criteria values for Malaysian aquatic life, indicating that organochlorine pesticide pollution is less of a problem than other organic or inorganic pollutants.     

Mathematical modelling of MSW incineration on a travelling bed

The rising popularity of incineration of municipal solid waste (MSW) calls for detailed mathematical modelling and understanding of the incineration process. In this paper, governing equations for mass, momentum and heat transfer for both solid and gaseous phases in a moving bed in a solid-waste incineration furnace are described and relevant sub-models are presented. The burning rates of volatile hydrocarbons in the moving bed of solids are limited not only by the reaction kinetics but also the mixing of the volatile fuels with the under-fire air. The mixing rate is averaged across a computation cell and correlated to a number of parameters including local void fraction of the bed, gas velocity and a length scale comparable to the particle size in the bed. A correlation equation is also included to calculate the mixing in the freeboard area immediately next to the bed surface. A small-scale fixed bed waste incinerator was built and test runs were made in which total mass loss from the bed, temperature and gas composition at different locations along the bed height were measured. A 2-D bed-modelling program (FLIC) was developed which incorporates the various sub-process models and solves the governing equations for both gases and solids. Thermal and chemical processes are mainly confined within a layer about 5-9 times in thickness of the averaged particle size in the burning bed. For a large part of the burning process, the total mass loss rate was constant until the solid waste was totally dried out and a period of highly rising CO emission followed. The maximum bed temperature was around 1200 K. The whole burning process ended within 60 min. Big fluctuations in species concentration were observed due to channelling and subsequent 'catastrophic' changes in the local bed conditions. Reasonably good agreement between modelling and measurements has been achieved. Yet the modelling work is complicated by the channelling phenomenon in the bed. Numerical simulations without consideration of the channelling effect produced very good agreement with experiments concerning the total mass loss, but significant discrepancy exists for temperature and gas composition profiles. Transient phenomena such as the breaking of waste particles and the "catastrophic" creation of new burning channels occurring during waste incineration is a vital area requiring further investigation at the fundamental level. The underlying theory of bed behaviour must be extended to include these transient events.     

Geochemistry of inorganic arsenic and selenium in a tropical soil: effect of reaction time, pH, and competitive anions on arsenic and selenium adsorption

Factors that can affect As and Se adsorption by soils influence the bioavailability and mobility of these elements in the subsurface. This research attempted to compare the adsorption capacities of As(III), As(V), Se(IV), and Se(VI) on a tropical soil commonly found in Singapore in a single-species system. The effect of reaction time, pH, and competitive anions at different concentrations on the adsorption of both As and Se species were investigated. The As and Se adsorption isotherm were also obtained under different background electrolytes. The batch adsorption experiments showed that the sequence of the As and Se adsorption capacities in the soil was As(V) > Se(IV) > As(III) > Se(VI). The adsorption kinetics could be best described by the Elovich equation. The adsorption of As(V), Se(IV), and Se(VI) appeared to be influenced by the variable pH-dependent charges developed on the soil particle surfaces. Phosphate had more profound effect than SO4(2-) on As and Se adsorption in the soil. The competition between PO4(3-) and As or Se oxyanions on adsorption sites was presumably due to the formation of surface complexes and the surface accumulation or precipitation involving PO4(3-). The thermodynamic adsorption data for As(V) and Se(IV) adsorption followed the Langmuir equation, while the As(III) and Se(VI) adsorption data appeared to be best-represented by the Freundlich equation.     

Pesticide concentrations in water and sediment and associated invertebrate toxicity in Del Puerto and Orestimba Creeks, California, 2007�C2008

The California??s San Joaquin River and its tributaries including Orestimba (ORC) and Del Puerto (DPC) Creeks are listed on the 2006 US EPA Clean Water Act §303(d) list for pesticide impairment. From December 2007 through June 2008, water and sediment samples were collected from both creeks in Stanislaus County to determine concentrations of organophosphorus (OP) and pyrethroid insecticides and to identify toxicity to Ceriodaphnia dubia and Hyalella azteca. OPs were detected in almost half (10 of 21) of the water samples, at concentrations from 0.005 to 0.912 ??g L^???1. Diazinon was the most frequently detected OP, followed by chlorpyrifos and dimethoate. Two water samples were toxic to C. dubia; based on median lethal concentrations (LC₅₀), chlorpyrifos was likely the cause of this toxicity. Pyrethroids were detected more frequently in sediment samples (18 detections) than in water samples (three detections). Pyrethroid concentrations in water samples ranged from 0.005 to 0.021 ??g L^???1. These concentrations were well below reported C. dubia LC₅₀s, and toxicity was not observed in laboratory bioassays. Cyfluthrin, bifenthrin, esfenvalerate, and ??-cyhalothrin were detected in sediment samples at concentrations ranging from 1.0 to 74.4 ng g^???1, dry weight. At DPC, all but one sediment sample caused 100% toxicity to H. azteca. Based on estimated toxicity units (TUs), bifenthrin was likely responsible for this toxicity and ??-cyhalothrin also contributed. At ORC, survival of H. azteca was significantly reduced in four of the 11 sediment samples. However, pyrethroids were detected in only two of these samples. Based on TUs, bifenthrin and ??-cyhalothrin likely contributed to the toxicity.